Author Index

A

  • Abbasi, S.Mehdi Influence of Hot-working and Solution Annealing on Microstructure and Mechanical Properties of Haynes 188 [Volume 31, Issue 1, 2020, Pages 77-88]
  • Akbari, mohamad reza Comparison on Porosity Percent, Microstructure and Compression Behavior of Steel Foams Containing 2 wt. % Cu and 2 wt. % P [Volume 31, Issue 1, 2020, Pages 63-76]
  • Akbarzadeh, Mehdi Investigation of the Tribological Properties of MoS2/Ni Composite Coatings Produced by Magnetron Sputtering [Volume 31, Issue 2, 2020, Pages 25-34]
  • Aliazdeh, Mehdi Evaluation of the Wettability and Other Physical Properties of Iron Ore Particles that Consumed in the Pelletizing Plant of Mobarakeh Steel Co. [Volume 31, Issue 1, 2020, Pages 49-62]
  • Alipour Behzadi, Mohamad Effect of heat input on microstructure and mechanical properties of A7020-T6 alloy joined by TIG welding [Volume 31, Issue 1, 2020, Pages 135-148]
  • Alizadeh, Mohsen Evaluation of the Wettability and Other Physical Properties of Iron Ore Particles that Consumed in the Pelletizing Plant of Mobarakeh Steel Co. [Volume 31, Issue 1, 2020, Pages 49-62]
  • Alizadeh, Morteza Effect of Current Density on Properties of Ni-Cu/Al2O3 Composite Coatings [Volume 31, Issue 1, 2020, Pages 13-26]
  • Ansariniya, Mahsa The Effect of Ni Addition on the Microstructure and Glass Forming Ability of Fe-Mo-P-C-B Bulk Amorphous Alloy [Volume 31, Issue 2, 2020, Pages 35-44]
  • Ashrafi, Ali The Feasibility of Producing CoCrFeMnNi High Entropy Alloy Coatings by Electrochemical Deposition Method and Its Characterization [Volume 31, Issue 2, 2020, Pages 109-120]
  • Azari, Rasul Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy Processed in Semi-Solid State by Means of Twin Screw [Volume 31, Issue 1, 2020, Pages 1-12]

B

  • Beikzadeh Noee, Saman Optimization of Effective Parameters on Copper Bioleaching from Low-Garde Sulfide Ore from Shahrbabak Copper Complex [Volume 31, Issue 2, 2020, Pages 95-108]

D

  • Damadi, S.Reza Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy Processed in Semi-Solid State by Means of Twin Screw [Volume 31, Issue 1, 2020, Pages 1-12]
  • Dehghani, Kamran Investigation of Metallurgical Structure and Mechanical Properties of Double-Sided Friction Stir Welded joint of AA5083 Plates [Volume 31, Issue 1, 2020, Pages 89-100]
  • Dehmolaei, Reza Effect of heat input on microstructure and mechanical properties of A7020-T6 alloy joined by TIG welding [Volume 31, Issue 1, 2020, Pages 135-148]

E

  • Ebadi, mostafa Effect of Colloid Zirconia on Corrosion Resistance of Low Cement Alumina Mortar under Arc Furnace Slag [Volume 31, Issue 2, 2020, Pages 57-68]
  • Emami, Masoud Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy Processed in Semi-Solid State by Means of Twin Screw [Volume 31, Issue 1, 2020, Pages 1-12]

G

  • Ghasemi, Sadegh The Effect of Ni Addition on the Microstructure and Glass Forming Ability of Fe-Mo-P-C-B Bulk Amorphous Alloy [Volume 31, Issue 2, 2020, Pages 35-44]
  • Ghasemi Banadkouki, Seyyed Sadegh Investigation of Abnormal Mechanical Behaviour of a Low Alloy Spring Steel containing 0.5wt%C-1.7wt%Si Under Bainitic- Martensitic- Retained Austenitic Condition [Volume 31, Issue 2, 2020, Pages 137-152]

H

  • Hasani, Saeed The Effect of Ni Addition on the Microstructure and Glass Forming Ability of Fe-Mo-P-C-B Bulk Amorphous Alloy [Volume 31, Issue 2, 2020, Pages 35-44]
  • Hazrati Azim, Babak Simulation of Solid Particles Mixing in a Pilot Leaching Reactor [Volume 31, Issue 1, 2020, Pages 101-110]
  • Heidarzadeh, Akbar Friction Stir Welding of Monel 400: Microstructure, Substructure, and Mechanical Properties [Volume 31, Issue 2, 2020, Pages 45-56]
  • Hojati, Milad Comparison on Porosity Percent, Microstructure and Compression Behavior of Steel Foams Containing 2 wt. % Cu and 2 wt. % P [Volume 31, Issue 1, 2020, Pages 63-76]
  • Hosseini pour, Seyyed Jamal Effect of Tantalum Oxide Addition on Hydrogen Treatment of Magnesium Hydride Nano-Composite Produced by Mechanical Alloying [Volume 31, Issue 2, 2020, Pages 81-94]

K

  • Kafashan, Hosein Optimization of effective parameters on oxidation resistance of ZrB2 ceramics [Volume 31, Issue 1, 2020, Pages 37-48]
  • Karimi Zarchi, Hamid Reza Investigation of Abnormal Mechanical Behaviour of a Low Alloy Spring Steel containing 0.5wt%C-1.7wt%Si Under Bainitic- Martensitic- Retained Austenitic Condition [Volume 31, Issue 2, 2020, Pages 137-152]
  • Kianirashid, alireza Investigation of Aluminosilicate Crystallization behavior in SiO2-Al2O3 System [Volume 31, Issue 1, 2020, Pages 122-134]

M

  • Mehrabi kali, Milad Effect of Tantalum Oxide Addition on Hydrogen Treatment of Magnesium Hydride Nano-Composite Produced by Mechanical Alloying [Volume 31, Issue 2, 2020, Pages 81-94]
  • Mirjalili, Mostafa Developing Phase Diagrams for Nano Binary Systems by MATLAB [Volume 31, Issue 2, 2020, Pages 121-130]
  • Mirsalehi, Seyyed Ehsan Investigation of Metallurgical Structure and Mechanical Properties of Double-Sided Friction Stir Welded joint of AA5083 Plates [Volume 31, Issue 1, 2020, Pages 89-100]
  • Moghaddam, Javad Zinc Recovery from Direct Leaching Sulfide Concentrate Residue in Pilot Scale [Volume 31, Issue 2, 2020, Pages 15-24]
  • Monir Vaghefi, Sayed Mahmoud The Feasibility of Producing CoCrFeMnNi High Entropy Alloy Coatings by Electrochemical Deposition Method and Its Characterization [Volume 31, Issue 2, 2020, Pages 109-120]
  • Moradpur, Ehsan Investigation of the Tribological Properties of MoS2/Ni Composite Coatings Produced by Magnetron Sputtering [Volume 31, Issue 2, 2020, Pages 25-34]
  • Morakabati, Maryam Influence of Hot-working and Solution Annealing on Microstructure and Mechanical Properties of Haynes 188 [Volume 31, Issue 1, 2020, Pages 77-88]

P

  • Pashangeh, Shima Investigation of Abnormal Mechanical Behaviour of a Low Alloy Spring Steel containing 0.5wt%C-1.7wt%Si Under Bainitic- Martensitic- Retained Austenitic Condition [Volume 31, Issue 2, 2020, Pages 137-152]

R

  • Rafiaei, Seyed Mahdi Study of Addition of Tetraethyl Orthosilicate (TEOS) on Microstructure and Iuminescence Properties of Nanoparticles of Y2O3: Tb3+ Phosphor Materials [Volume 31, Issue 2, 2020, Pages 129-136]
  • Rahmatian, Behrooz Investigation of Metallurgical Structure and Mechanical Properties of Double-Sided Friction Stir Welded joint of AA5083 Plates [Volume 31, Issue 1, 2020, Pages 89-100]
  • Rajabi, Mohammad Effect of Tantalum Oxide Addition on Hydrogen Treatment of Magnesium Hydride Nano-Composite Produced by Mechanical Alloying [Volume 31, Issue 2, 2020, Pages 81-94]
  • Ranjbar, Khalil Effect of heat input on microstructure and mechanical properties of A7020-T6 alloy joined by TIG welding [Volume 31, Issue 1, 2020, Pages 135-148]
  • Ranjbar, Khalil Thermodynamically Prediction of in-Situ Al3Ti, Al3Zr Aluminides Formation in Friction Stir Processing Based on Effective Gibbs Free Energy Change of Formation (〖"∆G" 〗^"e" ) Model [Volume 31, Issue 2, 2020, Pages 1-14]
  • Rashchi, Fereshteh Optimization of Effective Parameters on Copper Bioleaching from Low-Garde Sulfide Ore from Shahrbabak Copper Complex [Volume 31, Issue 2, 2020, Pages 95-108]

S

  • Sadeghi, Nima Simulation of Solid Particles Mixing in a Pilot Leaching Reactor [Volume 31, Issue 1, 2020, Pages 101-110]
  • Sadeghi, Nima Zinc Recovery from Direct Leaching Sulfide Concentrate Residue in Pilot Scale [Volume 31, Issue 2, 2020, Pages 15-24]
  • Safaei, Hamed Effect of Current Density on Properties of Ni-Cu/Al2O3 Composite Coatings [Volume 31, Issue 1, 2020, Pages 13-26]
  • Sahebian, Samaneh Developing Phase Diagrams for Nano Binary Systems by MATLAB [Volume 31, Issue 2, 2020, Pages 121-130]
  • Salahi, Esmail Effect of Colloid Zirconia on Corrosion Resistance of Low Cement Alumina Mortar under Arc Furnace Slag [Volume 31, Issue 2, 2020, Pages 57-68]
  • Salahinejad, Erfan Effect of Current Density on Properties of Ni-Cu/Al2O3 Composite Coatings [Volume 31, Issue 1, 2020, Pages 13-26]
  • Samie zafarghandi, Mahdi Influence of Hot-working and Solution Annealing on Microstructure and Mechanical Properties of Haynes 188 [Volume 31, Issue 1, 2020, Pages 77-88]
  • Sazegaran, Hamid Comparison on Porosity Percent, Microstructure and Compression Behavior of Steel Foams Containing 2 wt. % Cu and 2 wt. % P [Volume 31, Issue 1, 2020, Pages 63-76]
  • Seifoddini, Amir The Effect of Ni Addition on the Microstructure and Glass Forming Ability of Fe-Mo-P-C-B Bulk Amorphous Alloy [Volume 31, Issue 2, 2020, Pages 35-44]
  • Sheibani, Saeed Optimization of Effective Parameters on Copper Bioleaching from Low-Garde Sulfide Ore from Shahrbabak Copper Complex [Volume 31, Issue 2, 2020, Pages 95-108]

T

  • Tadayonsaidi, Mehran Investigation Of Spot Welding In Similar Joins Of Martensitic Advanced High Strength Steels (AHSS) [Volume 31, Issue 2, 2020, Pages 69-80]
  • Tavakoli Khorasani, Masoomeh Developing Phase Diagrams for Nano Binary Systems by MATLAB [Volume 31, Issue 2, 2020, Pages 121-130]
  • Teimoory, Farzaneh Developing Phase Diagrams for Nano Binary Systems by MATLAB [Volume 31, Issue 2, 2020, Pages 121-130]

Z

  • Zadali Mohammad Kotiyani, Mojtaba Thermodynamically Prediction of in-Situ Al3Ti, Al3Zr Aluminides Formation in Friction Stir Processing Based on Effective Gibbs Free Energy Change of Formation (〖"∆G" 〗^"e" ) Model [Volume 31, Issue 2, 2020, Pages 1-14]
  • Zandrahimi, Morteza Investigation of the Tribological Properties of MoS2/Ni Composite Coatings Produced by Magnetron Sputtering [Volume 31, Issue 2, 2020, Pages 25-34]